Application Instructions

Step 1

Clean the area thoroughly with rubbing alcohol or soap and water. Do not use Windex or a similar product because it will leave a residue behind that can prevent the vinyl decal from adhering well. 

Step 2

Prepare the decal for application by firmly rubbing a squeegee or credit card across the clear transfer tape. This removes any air bubbles that may have formed and makes the decal cling to the transfer tape.

Step 3

Peel the white or blue backing off the decale. If the decal clings to the backing, slowly replace the paper backing and repeat Step 2 until decal has fully adhered to the transfer tape.

Step 4

Slowly lower the decal onto the surface and rub it in place firmly with a squeegee or credit card. 

Step 5

Slowly peel the clear transfer tape at an angle. Be careful not to pull the decal off the surface. If the decal pulls away from the surface repeat Step 4.